Candy Ball Demo

It is recommended to use a straight pin for this design, or a sharp implement.  Using a dotting tool is not recommended as the ball does not come off of the dotting tool easy.


1. Dip the tip of your pin or sharp pointed implement into the Tech-Gel Glitter Base, let it settle into a small ball. Cure in the Dual Cure Lamp for 30 Seconds LED or 2 Minutes UV. Be sure to slowly turn the implement while curing or the gel will lose its roundness.
2. 
Paint the cured ball with Polish Pro Gel Polish, or Tech Gel Colour, or add Secrets Sparkle Glitter. Dip the embellishments or colour with another layer of Tech-Gel Glitter Base and cure in the Dual Cure Lamp for 30 Seconds LED or 2 Minutes UV.
3. Using Polish Pro Color Or Tech Gel Colour Paint three layers of Petals around the ball. Cure in the Dual Cure Lamp for 60 Seconds LED or 2 Minutes UV.
4. Dip the ball into the Tech-Gel Glitter Base to coat your layer of petals, let it settle into a small ball. Cure for 30 Seconds LED or 2 Minutes UV. Be sure to slowly turn the implement while curing or the gel will lose its roundness.
5. Repeat steps 3-4 until the desired effect and size is reached.
6. Apply Essential Seal and cure in the Dual Cure Lamp for 30 seconds in LED or 2 minutes in UV.
 Remove the tacky layer with a Nail Wipe saturated in Cleanse.
7. Remove the ball from your pin and file the back of the ball flat so it sits on the nail.